Kawasaki Ki-100-Ia Tony

Primary Guns
2 x 12.7mm Type 1 (Ho-103) machine guns with 250 rpg in wings.
Secondary Guns
2 x 20mm Type 1 (Ho-5) cannon with 200 rpg in cowl.
Defensive Guns
2 x 220 lb (100 kg) or 2 x 550 lb (250 kg) bombs or 2 x 317 lb (144 kg) drop tanks under wings.
1 x Army Type 4 (Mitsubishi Ha.112-II) air-cooled radial rated for 1,500 hp at sea level (1,600 hp with WEP).
Int Fuel Capacity
966 lbs (438 kg).
Ext Fuel Capacity
634 lbs (288 kg) in 2 drop tanks under wings.
Maximum Speeds
360 mph (579 kph) at 19,685 ft (6000 m).
Climb Rate
6 min to 16,405 ft (5000 m).
Service Ceiling
36,090 ft (11000 m).
870 – 1,367 miles (1400 – 2200 km).
39 ft 4.4 in (12.0 m).
28 ft 11.2 in (8.82 m).
12 ft 3.6 in (3.75 m).
Loaded Weight
7,705 lbs (3495 kg).
Wing Area
215.3 sq ft (20 sq m).
Wing Loading
35.8 lbs/sq ft (174.8 kg/sq m).


In 1944, the Kawasaki Ki-61 (construction of which was obviously inspired by Bf-109), still being one of the best fighters in IJAAS arsenal, was falling behind newest Allied fighters.

Seeking to upgrade the output of the 1,100 hp Ha-40 engine, Kawasaki started working on a 1,500 hp replacement, the Ha-140. This new engine was intended to be used in an upgraded version of the Ki-61 with larger wings for improved maneuvering. However, the engine encountered terrible teething problems, including a weak crankshaft and the wings were subject to failure during high-performance altitude testing.

With improvements to the wing and an increase in fuselage length, the Ki-61-II-KAI was ready for production, but the engines were still having problems. However, the Ministry of Munitions was confident that the engine problems would be solved and ordered Kawasaki to start building airframes.

By June 1944 the problem of home defense was becoming acute and while good engine-less airframes were sitting unused at the factory, operational Sentais were being forced to use older, less capable planes. Finally, in November 1944 the Munitions Ministry instructed Kawasaki to search for a suitable replacement for the ill-fated Ha-140.

Being designed around an inline engine, the Ki-61-II airframe was only 2’9” in diameter where the engine was mounted. All other engines of similar size were already spoken for and the only engine of even similar diameter and power output was the 4 foot diameter Ha-112-II radial engine then being used for bombers. After studying the FW-190A engine mount, which also married a large engine to a small airframe, work began on three Ki-61-II-KAI airframes. The result was called the Ki-100 and first took flight on February 1, 1945.

Due to the lighter weight of the engine, the plane came in at about 800 lbs. less than the Ha-140 powered Ki-61. The power output was the same and performance was identical in all respects except top speed, which was reduced somewhat due to the additional drag of the radial engine. Eventually 271 Ki-61-II airframes would be converted to Ki-100s with the remainder Ki-100s being purpose-built.

The appearance of the new Tony came as a complete and unpleasant surprise to Allied aircrews and Japanese pilots hailed it as the best and most reliable fighter they had. Its easy handling characteristics were particularly welcome to the Army as younger pilots often had less than 100 hours total flight time before being assigned to combat units.


  1. Guns — The non-converging Ho-5s in the cowl are very accurate up to maximum range and combined with the 12.7mm guns in the wings give the Tony II a good anti-air capability.


  1. Performance — By the time it reached front-line service, it was totally outclassed by Allied fighters at all altitudes.



First Name (required)
Second Name (required)
Enter your call sign here if you wish to change it You will be able to change it later Allowed only a-z, A-Z and 0-9 and "_","-"

All fields are required

* This field is visible only to you
terms and conditions

Already have an account?


Forgot your password?

Password reset


Not recently active